TME WORKER leak & flow tester
A dependable, affordable bench-top tester built for production lines, labs and QA. Run pressure/vacuum decay leak, flow and occlusion tests on packaging and components - up to 300 psig with 0.0001 psi decay resolution and clear pass/fail indication.
Configurable leak, flow & occlusion
Order it as a leak tester, leak & flow tester, or leak & occlusion tester - and grow as your QA needs grow.
Pressure / vacuum decay
Detect leaks in non-porous, rigid or flexible packages using pressure or vacuum decay methods.
Flow testing
Precision mass-flow sensors measure airflow through materials, from 10 sccm to 10 lpm.
Occlusion testing
Measure back pressure to gauge the extent of part occlusion or blockage.
Clear pass / fail
Two-line vacuum fluorescent display with large lighted pass/fail indicators for fast line decisions.
Built for repeatable line testing
Set the program
Store up to 100 programs with user-adjustable fill, settle and test times for each part.
Run semi-automatic
PLC controls drive a consistent cycle; large lighted indicators show pass or fail at a glance.
Record results
Store 5,000 results with lot codes, operator names and test references in the data log.
Connect & export
Two-way RS-232 communication, with optional Ethernet, integrates results into your QC systems.
TME WORKER leak & flow tester specifications
| Configurations | Leak tester · leak & flow tester · leak & occlusion tester |
| Test methods | Pressure/vacuum decay, flow, occlusion; creep-to-fail & integrity testing |
| Pressure ranges | Up to 300 psig (pressure or vacuum models) |
| Flow ranges | 10 sccm to 10 lpm |
| Decay resolution | 0.0001 psi or 0.01 mbar/second |
| Control | PLC, semi-automatic operation |
| Display | Two-line vacuum fluorescent display with lighted pass/fail |
| Programs & data | 100 programs; stores 5,000 results (lot code, operator, reference) |
| Connectivity | RS-232 two-way; optional Ethernet |
| Calibration | NIST-traceable calibration available |
| Materials tested | Aluminium, composites, film, foil, metal, plastics/polymers, steel |
Where the WORKER is used in India
Flexible packaging
Line-side leak and flow checks on pouches and films for fast, repeatable QC release.
Pharma & beverage
Container and closure integrity testing for pharmaceutical and beverage packaging.
Electronics & aeronautics
Leak, flow and occlusion testing of components and assemblies, with NIST-traceable calibration.
TME WORKER - common questions
How is it configured?
As a leak tester, leak & flow tester, or leak & occlusion tester - in pressure or vacuum models.
What pressure and flow can it run?
Up to 300 psig pressure and 10 sccm-10 lpm flow, with 0.0001 psi decay resolution.
Can it run on a production line?
Yes - PLC semi-automatic control, 100 programs, 5,000 stored results and clear pass/fail indicators.
Who supports it in India?
FITCO supplies, installs, trains and provides AMC and NIST-traceable calibration across India.
Explore the TME range
Put a TME WORKER on your line in India
Tell us your part, configuration (leak / flow / occlusion) and pressure range - FITCO will quote the right TME WORKER and handle installation, training and calibration.